Acoustic paramagnetic resonance
Absorption of sound by particles suspended in a magnetic field
- 2 min read
- 3 chapters
Related on Lably
Through Sound, Magnet and Magnetic field
History
After discovery of EPR in 1944, Evgeny Zavoisky predicted that the resonance phenomenon should not be restricted to radio or microwave absorption but could be extended to the sound waves. This idea was theoretically developed by his collaborator Semen Altshuler in 1952 and independently by Alfred Kastler; whereas Altshuler reported the effect on electron spins, Kastler calculated a nuclear spin system. The first experimental detection of the APR was reported in 1955 using 35Cl nuclei in single crystals of sodium chlorate. This nuclear-APR work was extended to electron-APR in 1959. Further applications of APR to nuclear polarization and acoustic masers were later proposed by Kastler and Charles Townes.
Sign in to keep reading
2 more chapters are free with a Lably account.
Mechanism
The APR effect is very similar to EPR: every electron or nucleus, either free or in a solid, has a magnetic moment and an associated with it spin. The spin can take integer or half-integer values, e.g. 1/2, 1, 3/2, etc., and the corresponding magnetic components ms = ±1/2, ±1, ±3/2, etc. Here, the levels for plus and minus spin values are degenerate, that is have equal energies. Upon application of external magnetic field, those spins align either along the field or opposite to it; in terms of energy diagram, the energy levels split as shown in the figure. If a sound wave with a certain quantum energy E irradiates this spin system, at certain value of magnetic field, when E is equal to the magnetic splitting ΔE, resonant absorption of sound takes place, that is the APR effect.
Both in EPR and APR, the absorbed energy is transferred to the lattice via spin-phonon relaxation. However, whereas in EPR this process is of second order, and thus involves two phonons, the relaxation takes only one phonon in APR and is therefore much faster. This affects the lineshape of the resonance and its temperature dependence and allows probing the spin-lattice relaxation differently in EPR and APR.
Experimental setup
APR is commonly measured using the pulsed echo technique at high sound frequencies of the order 100 MHz – 100 GHz. Two opposite sides of a studied crystal are mirror polished and made parallel to each other, and a piezoelectric crystal is attached to one side. It generates an ultrasound wave which is detected after multiple bouncing between the flat sides, and the signal attenuation serves as the measure of the resonant absorption. The crystal is located inside the magnet capable of providing static field corresponding to the applied frequency. For an electron with spin 1/2 and the splitting factor of the energy levels (the so-called spectroscopic splitting factor g) g = 2, the required field is 33–33000 Gauss for frequencies 100 MHz – 100 GHz.