Lably
Skip to content

ANSI/ASME Y14.1

American standard for paper sizes

  • 1 min read
  • 1 chapters

Explore on Lably

ToursExplore Lably’s 3D tours

ANSI/ASME Y14.1 has been revised or updated in 1995, 2005, 2012 and 2022. It had an accompanying standard, ANSI/ASME Y14.1M, that defined metric drawing paper sizes based upon ISO 216 and ISO 5457. ASME Y14.1 and ASME Y14.1M have now been revised and consolidated into one document, ASME Y14.1-2020, Drawing Sheet Size and Format, published on 18 December 2020.

With care, documents can be prepared so that the text and images fit on either ANSI or their equivalent ISO sheets at 1:1 reproduction scale.

Size F does not continue the alphabetic series, because it does not exhibit the same aspect ratios.

Sizes G, H, J and K are roll formats. G size is 11 in (279.4 mm) high, but variable width up to 90 in (2286 mm) in increments of 8+1⁄2 in. Such sheets were at one time used for full-scale layouts of aircraft parts, wiring harnesses and the like, but today are generally not needed, due to widespread use of computer-aided design (CAD) and computer-aided manufacturing (CAM).

More in Engineering

NanotechnologyTechnology with features near one nanometerSoftware engineeringEngineering approach to software developmentChemical engineeringEngineering discipline focused on the design and operation of chemical plantsAerospace engineeringBranch of engineeringASTM InternationalStandards organizationProfessional associationOrganization promoting a specific profession