Lably
Skip to content

Related on Lably

Through Pond, Keystone species and Homogeneity and heterogeneity

These structures modify the natural environment in such a way that the overall ecosystem builds upon the change, making beavers a keystone species and ecosystem engineers. In native regions, these dams reduce downstream flooding, clean water, help restore and maintain wetlands and provide important firebreaks in fire prone regions. Abandoned damns gradually silt-over and decompose leaving rich soil that gradually becomes other ecological niches.

Inspired by the positive effects on the environment, humans build Beaver Dam Analogues (also known as BDAs) that can provide similar ecosystem services, deliberately deployed for water retention in the landscape and the construction of ponds as wetland and breeding ground for other species. Beaver's impoundments can be disruptive in human-managed landscapes, such as farmland or near roads or homes. When introduced non-natively, they can be extremely damaging to natural ecosystems, such as in Southern Patagonia.

Construction

A minimum water level of 0.6 to 0.9 metres (2 ft 0 in to 2 ft 11 in) is required to keep the underwater entrance to beaver lodges from being blocked by ice during the winter. In lakes, rivers and large streams with deep enough water, beavers may not build dams, and live in bank burrows and lodges.

Beavers start construction by diverting the stream to lessen the water's flow pressure. Branches and logs are then driven into the mud of the stream bed to form a base. Then sticks, bark (from deciduous trees), rocks, mud, grass, leaves, masses of plants, and anything else available are used to build the superstructure. Beavers can transport their own weight in material; they drag logs along mudslides and float them through canals to get them in place. Once the dam has flooded enough area to the proper depth to form a protective moat for the lodge (often covering many acres), beavers begin construction of the lodge.

Trees approaching a diameter of 90 centimetres (2 ft 11 in) may be used to construct a dam, although the average is 10 to 30 centimetres (3.9 in to 11.8 in). Log length depends on the diameter of the tree and the size of the beaver. There are recorded cases of beavers felling trees of 45 metres (147 ft 8 in) tall and 115 centimetres (3 ft 9 in) in diameter. Logs of this size are not intended to be used as structural members of the dam; rather, the bark is used for food, and sometimes to get to upper branches. It takes a beaver about 20 minutes to cut down a 15-centimetre (5.9 in) wide aspen, by gnawing a groove around the trunk in an hourglass shape. A beaver's jaws are powerful enough to cut a 1.5-centimetre (0.59 in) sapling in one bite.

Beavers are most active in maintaining their dams in the fall and spring in colder climates, while in ice-free climates, they may maintain their dams throughout the year, albeit with reduced activity during the summer. A study in Poland found that beavers could rebuild a destroyed dam and restore water levels in approximately 8 hours.

If beavers are considered central place foragers, their canals may be considered an extension of their "central place" far beyond the lodge, according to a 2004–2012 study that mapped beaver ponds and cut stumps.

Some people consider that by building dams, beavers are expressing tool use behaviour.

Size

Beaver dams typically range in length from a few meters to about 100 metres (328 ft 1 in). Canals can be over 500 metres (1,640 ft 5 in) long. The largest known beaver dam is in Wood Buffalo National Park in Alberta, Canada, and is 775 metres (2,542 ft 8 in) long. Satellite photos provided by NASA WorldWind show the dam did not exist in 1975, but it appeared in subsequent images. It has two or more lodges and is a combination of two original dams. Google Earth images show new dams being built which could ultimately join the main dam and increase the overall length by another 50 to 100 metres (164 ft 1 in to 328 ft 1 in) during the next decade. Coordinates: 58°16′15″N 112°15′6″W / 58.27083°N 112.25167°W.

Another large beaver dam measuring 652 metres (2,139 ft) long, 4.3 metres (14 ft) high and 7.0 metres (23 ft) thick at the base was found in Three Forks, Montana.

Sign in to keep reading

3 more chapters are free with a Lably account.

More in Biology