Related on Lably
Through Iron, Carbon and Ferrous metallurgy
Metallurgy
In the iron–carbon system (i.e. plain-carbon steels and cast irons) it is a common constituent because ferrite can contain at most 0.02% by mass of uncombined carbon. Therefore, in carbon steels and cast irons that are slowly cooled, a portion of the carbon is in the form of cementite. Cementite forms directly from the melt in the case of white cast iron. In carbon steel, cementite precipitates from austenite as austenite transforms to ferrite on slow cooling, or from martensite during tempering. An intimate mixture with ferrite, the other product of austenite, forms a lamellar structure called pearlite.
While cementite is thermodynamically unstable, eventually being converted to austenite (low carbon level) and graphite (high carbon level) at higher temperatures, it does not decompose on heating at temperatures below the eutectoid temperature (723 °C) on the metastable iron-carbon phase diagram.
Mechanical properties are as follows: room temperature microhardness 760–1350 HV; bending strength 4.6–8 GPa, Young's modulus 160–180 GPa, indentation fracture toughness 1.5–2.7 MPa√m.
The morphology of cementite plays a critical role in the kinetics of phase transformations in steel. The coiling temperature and cooling rate significantly affect cementite formation. At lower coiling temperatures, cementite forms fine pearlitic colonies, whereas at higher temperatures, it precipitates as coarse particles at grain boundaries. This morphological difference influences the rate of austenite formation and decomposition, with fine cementite promoting faster transformations due to its increased surface area and the proximity of the carbide-ferrite interface. Furthermore, the dissolution kinetics of cementite during annealing are slower for coarse carbides, impacting the microstructural evolution during heat treatments.
Sign in to keep reading
2 more chapters are free with a Lably account.
Pure form
Cementite changes from ferromagnetic to paramagnetic upon heating to its Curie temperature of approximately 480 K (207 °C).
A natural iron carbide (containing minor amounts of nickel and cobalt) occurs in iron meteorites and is called cohenite after the German mineralogist Emil Cohen, who first described it.
Other iron carbides
There are other forms of metastable iron carbides that have been identified in tempered steel and in the industrial Fischer–Tropsch process. These include epsilon (ε) carbide, hexagonal close-packed Fe2–3C, precipitates in plain-carbon steels of carbon content > 0.2%, tempered at 100–200 °C. Non-stoichiometric ε-carbide dissolves above ~200 °C, where Hägg carbides and cementite begin to form. Hägg carbide, monoclinic Fe5C2, precipitates in hardened tool steels tempered at 200–300 °C. It has also been found naturally as the mineral Edscottite in the Wedderburn meteorite.