Comparison of C Sharp and Visual Basic .NET

Language comparison

Though C# and VB.NET are syntactically very different, that is where the differences mostly end. Microsoft developed both of these languages to be part of the same .NET Framework development platform. They are both developed, managed, and supported by the same language development team at Microsoft. They compile to the same intermediate language (IL), which runs against the same .NET Framework runtime libraries. Although there are some differences in the programming constructs (discussed further below), their differences are primarily syntactic and, assuming one avoids the Visual Basic "Compatibility" libraries provided by Microsoft to aid conversion from VB6, almost every command in VB has an equivalent command in C# and vice versa. Lastly, both languages reference the same Base Classes of the .NET Framework to extend their functionality. As a result, with few exceptions, a program written in either language can be run through a simple syntax converter to translate to the other. There are many open source and commercially available products for this task. The only fundamental differences between the languages can be found in the implementation of interfaces and in the declaration, raising and handling of events. Although both languages are high-level programming languages, VB.NET maintains a slightly higher level of abstraction in some respects.

Runtime multi-language support

One of the main goals of .NET has been its multi-language support. The intent of the design was that all of the various Microsoft languages should have the same level of access to all OS features, should be able to expose the same level of power and usability, and simplify calling from a module in one language to that written in another language.

In implementation, all .NET programming languages share the same runtime engine, uniform abstract syntax tree, and Common Intermediate Language. Additionally all .NET languages have access to platform features including garbage collection, cross language inheritance, exception handling, and debugging. This allows the same output binary to be produced from any .NET programming language.

Development environment

Visual Studio provides minor differences in the development environment for C# and VB.Net. With each subsequent release of Visual Studio, the differences between development environments for these languages have been reduced. For instance early versions of Visual Studio had poor support for Intellisense in C# compared to Visual Basic .NET, and did not offer background compilation for C#. Currently, the main differences in the development environments are additional features for Visual Basic .NET that originated in VB6, including:

• The default namespace is hidden (but can be disabled)
• Certain project files are hidden (the user can show them)
• The auto-generated My.* namespaces contain many commonly used shortcuts brought over from VB6, such as methods for operating on the registry and application configuration file

Background compilation is a feature of the Visual Studio IDE whereby code is compiled as it is written by the programmer with the purpose of identifying compilation errors without requiring the solution to be built. This feature has been available for Visual Basic since .NET 1.1 and was present in early versions of Visual Studio for Visual Basic .NET. However, background compilation is a relatively new concept for Visual C# and is available with service pack 1 for Visual Studio 2008 Standard Edition and above. A distinct disadvantage for C# is that the Error List panel does not update until the solution is rebuilt. Refactoring large projects in C# is made more difficult by the need to frequently rebuild the solution in order to highlight compilation errors. Such is not the case with Visual Basic because the Error List panel is synchronized with the background compiler.

Background compilation is less demanding on system resources and results in faster build cycles. This is a particular advantage with large projects and can significantly reduce the time required to start debugging in the IDE.

Language features

The bulk of the differences between C# and VB.NET from a technical perspective are syntactic sugar. That is, most of the features are in both languages, but some things are easier to do in one language than another. Many of the differences between the two languages are actually centered around the IDE.

Features of Visual Basic .NET not found in C#

• Variables can be declared using the WithEvents construct. This construct is available so that a programmer may select an object from the Class Name drop down list and then select a method from the Declarations drop down list to have the Method signature automatically inserted
• Auto-wireup of events. VB.NET has the Handles syntax for events, which connects event handlers to object variables rather than to objects.
• Firing of events is done with the RaiseEvent keyword, giving the IDE the chance to show a list of available events to pick from. RaiseEvent implicitly checks if there are any event handlers wired up. (in C# raising an event is syntactically identical to calling a procedure, and it requires an additional line of code to check for wired event handlers)
• Delegates for events don't need to be declared. They are implicitly declared in the declaration of the events.
• Referring to an object using an unqualified dot reference, using the With ... End With structure
• XML Literals
• Inline date declarations, e.g. #12/31/2000#
• Module (although C#'s static classes with additional semantics, but each field must be individually declared as static)
• Members of Modules imported to the current file, can be accessed with no preceding container accessor
• The My namespace.
• COM components and interoperability was more powerful in VB.NET, as the Object type is bound at runtime; however, C# 4.0 added the dynamic type, which functions as a late-bound form of Object
• Namespaces can be imported at the project level, so that they don't have to be imported into each individual file, as in C#
• Definition of conditional compiler constants
• Property methods may take parameters
• Properties can be passed to methods with ByRef parameters (ref parameters in C#). In C# you have to write three additional instructions: Declare a variable, copy the property value into the variable and copy the variable back to the property after the method call.
• Enums can be defined inside interfaces
• Case statements may contain inequality expressions, like Is >= 3. (in C# this can be mimicked by nested Else and If statements)
• Overloads keyword specifies that a property or procedure redeclares one or more existing properties or procedures with the same name within the same class or the base class. (the lack of this keyword in C# might lead to inadvertent overloading)
• Implements keyword to indicate which interfaces a class member implements. In C# a similar syntax exist, but it is optional and it can only be applied if the member implements a single interface.
• Like operator for pattern comparison of strings in a much simpler way than using regular expressions. (in C# the same is available with the Microsoft.VisualBasic.CompilerServices.LikeOperator.LikeString method, but not as a handy language key word)
• Return statement is not required. Return can also be done by assigning the value to the function
• Visual basic has built in constants like vbCrLf and vbTab
• No out parameter modifier exists, because in VB all variables are automatically initialised.
• The MyClass keyword behaves like an object variable referring to the current instance of a class as originally implemented. MyClass is similar to Me, but all method calls on it are treated as if the method were NotOverridable.
• MyBase.New is used to explicitly call a base class constructor from a derived class constructor.
• The My feature provides easy and intuitive access to a number of .NET Framework classes, enabling the Visual Basic user to interact with the computer, application, settings, resources, and so on.
• Local variables (i.e. variables declared inside of a procedure) are automatically initialized.
• Local variables can be declared with the Static modifier in order to preserve their value between calls to the procedure.
• The Default declaration makes a property an index and able to use the shorter syntax for collection retrievals like MyCollection(5). C# has a similar construct reusing the keyword this as the name of the property. Multiple indexers can be declared using keys of different types e.g. MyCollection(5) or MyCollection("Bob").
• C# lacks the DirectCast (mapping to a single CLR instruction), strict type conversion can be achieved by the as operator which includes an additional runtime error protection.
• C# lacks the End statement which abruptly terminates an application.
• Lambda expressions inference Dim x = Function(n As Integer) n + 1

Features of C# not found in Visual Basic .NET

• Use C# ref struct in VB.NET : Detailed information can be found, for example here : https://www.vbforums.com/showthread.php?889867-Use-C-ref-struct-in-VB-NET-Today-And-vote-against-preventing-this-in-Roslyn
• Multi-line comments. In VB this is handled in the Visual Studio IDE editor, which adds comment markers to selections.
• Static classes (classes which cannot contain any non-static members, although VB.NET's Modules are essentially static classes with additional semantics)
• Can use checked and unchecked contexts for fine-grained control of overflow/underflow checking
• Iterative for-loops can contain multiple conditionals, such as for(int i = 0; i < 10 && somethingTrue; i++). This is a legacy of C, where the for statement is basically syntactic sugar for a while statement.
• The getter and setter of a property may implement separate interfaces. In VB you'd have to define two properties instead: a read-only property implementing one interface, and a write-only property implementing the other interface.
• Implicit interface implementation
• Can use the coalesce operator ?? to return the first non-null value (ex. null ?? null ?? 1 returns 1). VB.NET would have to use the If function with two parameters - e.g. If(Nothing, If(Nothing, 1)) returns 1.
• Pointers (in the unsafe context)
• Conditional operator ?: (someThingTrueOrFalse) ? whenTrue() : whenFalse();. VB.NET would have to use the If function with three parameters - i.e. If(someThingTrueOrFalse, whenTrue(), whenFalse()).

Other characteristics of Visual Basic .NET not applicable to C#

• Conversion of Boolean value True to Integer may yield -1 or 1 depending on the conversion used
• Assigning and comparing variables uses the same token: =. Whereas C# has separate tokens, == for comparison and = to assign a value
• VB.NET identifiers are not case-sensitive.
• When assigning a value to a variable with a different data type (and with Option Strict not turned on), VB.NET will coerce the value if possible. This automatic coercion can sometimes lead to unexpected results, for example:

<span id="mw1Q"></span><span class="k" id="mw1g">Dim</span><span class="w" id="mw1w"> </span><span class="n" id="mw2A">i</span><span class="w" id="mw2Q"> </span><span class="ow" id="mw2g">As</span><span class="w" id="mw2w"> </span><span class="kt" id="mw3A">Integer</span><span class="w" id="mw3Q"> </span><span class="o" id="mw3g">=</span><span class="w" id="mw3w"> </span><span class="s" id="mw4A">"1"</span><span class="w" id="mw4Q"> </span><span class="c" id="mw4g">'Compiler automatically converts String to Integer</span> <span class="k" id="mw4w">Dim</span><span class="w" id="mw5A"> </span><span class="n" id="mw5Q">j</span><span class="w" id="mw5g"> </span><span class="ow" id="mw5w">As</span><span class="w" id="mw6A"> </span><span class="kt" id="mw6Q">String</span><span class="w" id="mw6g"> </span><span class="o" id="mw6w">=</span><span class="w" id="mw7A"> </span><span class="mi" id="mw7Q">1</span><span class="w" id="mw7g"> </span><span class="c" id="mw7w">'Compiler automatically converts Integer to String</span> <span class="k" id="mw8A">If</span><span class="w" id="mw8Q"> </span><span class="n" id="mw8g">i</span><span class="w" id="mw8w"> </span><span class="o" id="mw9A">=</span><span class="w" id="mw9Q"> </span><span class="n" id="mw9g">j</span><span class="w" id="mw9w"> </span><span class="k" id="mw-A">Then</span><span class="w" id="mw-Q"> </span><span class="c" id="mw-g">'Compiler does cast and compare between i and j</span> <span class="w" id="mw-w"> </span><span class="n" id="mw_A">MsgBox</span><span class="p" id="mw_Q">(</span><span class="s" id="mw_g">"Avoid using, but this message will appear!"</span><span class="p" id="mw_w">)</span> <span class="k" id="mwAQA">End</span><span class="w" id="mwAQE"> </span><span class="k" id="mwAQI">If</span>

Although the default is for Option Strict to be off for backward compatibility reasons, it is recommended by Microsoft and widely considered to be good practice to turn Option Strict on, due to the fact that it increases application performance and reduces the possibility of naming errors and other programming mistakes.

• Val() function which also parses a null value while converting into double (In c# Convert.ToDouble() is used to convert any object into a double type value, but which throws an exception in the case of a null value)
• CInt, CStr, CByte, CDbl, CBool, CDate, CLng, CCur, CObj and a wide variety of conversion functions built into the language

Other characteristics of C# not applicable to Visual Basic .NET

• By default, numeric operations are not checked. This results in slightly faster code, at the risk that numeric overflows will not be detected. However, the programmer can place arithmetic operations into a checked context to activate overflow checking. (It can be done in Visual Basic by checking an option)
• C# identifiers are case-sensitive.
• To assign the same value to multiple variables, you can use a=b=c.

Syntax comparisons

Visual Basic .NET terminates a block of code with End BlockName statements (or Next statements, for a for loop) which are more familiar for programmers with experience using T-SQL. In C#, the braces, {}, are used to delimit blocks, which is more familiar to programmers with experience in other widely deployed languages such as C++ and Java. Additionally, in C# if a block consists of only a single statement, the braces may be omitted.

C# is case sensitive while Visual Basic .NET is not. Thus in C# it is possible to have two variables with the same apparent name, for example variable1 and Variable1. Visual Studio will correct (make uniform) the case of variables as they are typed in VB.NET. In some cases however, case sensitivity can be useful. C# programmers typically capitalize type and member names and leave field and variable names lowercase. This allows, for example, a fairly natural naming of method arguments: public int CalculateOrders(Customer customer). This can, however, cause problems for those converting C# code to a case-insensitive language, such as Visual Basic, or to those unaccustomed to reading a case sensitive language.

Keywords

Visual Basic is not case sensitive, which means that any combinations of upper and lower case letters in keywords are acceptable. Visual Studio automatically converts all Visual Basic keywords to the default capitalised forms, e.g. "Public", "If".

C# is case sensitive and all C# keywords are in lower cases.

Visual Basic and C# share most keywords, with the difference being that the default Visual Basic keywords are the capitalised versions of the C# keywords, e.g. Public vs public, If vs if.

A few keywords have very different versions in Visual Basic and C#:

• Friend vs internal - access modifiers allowing inter-class but not inter-assembly reference, except for friend assemblies
• Me vs this - a self-reference to the current object instance
• MustInherit vs abstract - prevents a class from being directly instantiated, and forces consumers to create object references to only derived classes
• MustOverride vs abstract - for forcing derived classes to override this method
• MyBase vs base - for referring to the base class from which the current class is derived
• NotInheritable vs sealed - for declaring classes that may not be inherited
• NotOverridable vs sealed - for declaring methods that may not be overridden by derived classes
• Overridable vs virtual - declares a method as being able to be overridden in derived classes
• Overrides vs override - for marking a virtual method as overridden
• Shared vs static - for declaring methods that do not require an explicit instance of an object

Some C# keywords such as sealed represent different things when applied to methods as opposed to when they are applied to class definitions. VB.NET, on the other hand, uses different keywords for different contexts.

Comments

Conditionals

Loops

Comparers

Primitive types

Object types

Adoption and community support

Both C# and VB.NET have high adoption rates, and very active developer communities and Microsoft fully supports both communities. .NET framework developers widely use both VB.NET and C# as primary languages. However, C# has more community activity on the Internet and there are more books available for C#. This may indicate either that there is more adoption of C# or that users need more help with it.

Examples of community and industry adoption include:

• TIOBE Programming Community Index for July 2010 show that C# surpassed Visual Basic
• TIOBE Programming Community Index shows that VB.NET surpassed C# in 2018
• An original C# language designer, Scott Wiltamuth, stated in a March 2010 blog that the "most reliable numbers we have... show roughly equal adoption" for VB.NET and C#.
• A 2007 Forrester Research poll revealed that 59% of .NET developers used only VB.NET to create software.
• Visual Basic Express is the most popular download of all the Visual Studio Express downloads.
• According to a November 2007 survey conducted by Visual Studio Magazine "41 percent said they used C#, 34 percent programmed in VB.NET, while 25 percent responded with 'other.'"
• Stephen Wiley, marketing product manager at Apress has reported "C# titles outsell VB.NET title books handily, by somewhere between a 2–1 and 3–1 margin."
• MSDN Blogs, the blogging site for Microsoft employees, has 770,000 posts that discuss C#, while only 378,000 mention VB.Net (as of Feb 04, 2016)
• Google Groups, a Usenet search engine, returns 35,200,000 hits for "VB .Net", and 244,000,000 for "C#" (as of Feb 04, 2016)
• The 2018 Stack Overflow developers user survey stated that 35% of professional developers used C# while only 6.9% used VB.NET.

Other languages

C++/CLI (formerly Managed C++)

C++/CLI (a replacement for Managed Extensions for C++) does not have the adoption rate of C# or VB.NET, but does have a significant following. C++/CLI syntactically, stylistically, and culturally is closest to C#. However, C++/CLI stays closer to its C++ roots than C# does. C++/CLI directly supports pointers, destructors, and other unsafe program concepts which are not supported or limited in the other languages. It allows the direct use of both .NET code and standard C++ code. C++/CLI is used for porting native/legacy C++ applications into the .NET framework, or cases where the programmer wants to take more control of the code; but this control comes at a significant cost of ease of use and readability. Many of the automated tools that come with Visual Studio have reduced functionality when interacting with C++ code. This is because reflection cannot provide as much information about the code as it can for C# and VB.net

J#

J# runs a distant fourth in .NET adoption. J# is a language mainly designed to ease transition of Java applications to the .NET framework; it allows developers to leave much of their Java or J++ code unchanged while still running it in the .NET framework, thus allowing them to migrate small pieces of it into another .NET language, such as C#, individually. J# does not receive the same level of updates as the other languages, and does not have the same level of community support. For example, Visual Studio 2005 Team System supports automatic generation of Unit Tests in C#, VB.Net, and C++, but excludes J#. J# has been discontinued and is not included in Visual Studio 2008 or newer versions, since the existing J# feature set largely meets customer needs and usage of J# is declining.

Additional .NET languages

All .NET languages compile down to Common Intermediate Language (CIL), which contains rich metadata and is functionally and logically equivalent to the original .NET language code. For these reasons, while it is possible to code directly in CIL, it is rarely done. The equivalency of CIL to .NET language code permits tools such as .NET Reflector to transform a .NET assembly into source code that is nearly identical to the original source. Code obfuscators are often used to guard against this, and operate by directly modifying the CIL of an assembly in order to make it difficult or impossible to de-compile to a higher level .NET language.