Lably
Skip to content

Grade (climbing)

Degree of difficulty of a climbing route

  • 31 min read
  • 7 chapters

Related on Lably

Through Full stop

In free climbing (i.e. climbing rock routes with no aid), the most popular grading systems are the French numerical or sport system (e.g. 7c+), the American YDS system (e.g. 5.13a), and latterly the UIAA scale (e.g. IX+). These systems solely grade the technical difficulty and are used for the lower-risk activity of sport climbing. The American system adds an R/X suffix to calibrate the additional risks of traditional climbing routes. Notable traditional grading-systems include the British E-grade system (e.g. E4 6a).

In bouldering (i.e. rock climbing on short routes), the popular systems are the American V-scale (or "Hueco") system (e.g. V14), and the French "Font" system (e.g. 8C+). The Font system often attaches an "F" prefix to further distinguish it from French sport climbing grades, which itself uses an "f" prefix (e.g. F8C+ vs. f8c+). It is increasingly common for sport-climbing rock-routes to describe their hardest technical movements in terms of their boulder grade (e.g. an f7a sport climbing route being described as having a V6 crux).

In aid climbing (i.e. the opposite of free climbing), the most widely used system is the A-grade system (e.g. A3+), which was recalibrated in the 1990s as the "new wave" system from the legacy A-grade system. For "clean aid climbing" (i.e. aid climbing equipment is used but only where the equipment is temporary and not permanently hammered into the rock), the most common system is the C-system (e.g. C3+). Aid climbing grades take time to stabilize as successive repeats of aid climbing routes can materially reduce the grade.

In ice climbing, the most widely used grading system is the WI ("water ice") system (e.g. WI6) and the identical AI ("alpine ice") system (e.g. AI6). The related sport of mixed climbing (i.e. ice and dry-tool climbing) uses the M-grade system (e.g. M8), with other notable mixed grading systems including the Scottish Winter system (e.g. Grade VII). Pure dry-tooling routes (i.e. ice tools with no ice) use the D-grade prefix (e.g. D8 instead of M8).

In mountaineering and alpine climbing, the complexity of the routes requires several grades to reflect the difficulties of the various rock, ice, and mixed climbing challenges. The International French Adjectival System (IFAS, e.g.TD+) – which is identical to the "UIAA Scale of Overall Difficulty" (e.g. I–VI) – is used to grade the 'overall' risk and difficulty of mountain routes (with the gradient of the snow/ice fields). For example, the 1938 Heckmair Route on the Eiger is graded: ED2 (IFAS), VI− (UIAA), A0 (A-grade), WI4 (WI-grade), 60° slope. Related 'commitment grade' systems include the American National Climbing Classification System (e.g. I–VI).

History

In 1894, the Austrian mountaineer Fritz Benesch introduced the first known climbing grading system, which he introduced to rock climbing. The "Benesch scale" had seven levels of difficulty, with level VII the easiest and level I the hardest; as more difficult climbs were made, the grades of level 0 and level 00 were added.

In 1923, German mountaineer Willo Welzenbach compressed the scale and reversed the order so level 00 became level IV–V, and it became popular in the Alps. In 1967, the "Welzenbach scale" formally became the "UIAA scale" for rock climbing (or "UIAA Scale of Difficulty") with Roman numerals I–VI, and a "+" and "−" to refine each level. The UIAA also incorporated proposals made in 1943 by Lucien Devies and the Groupe de Haute Montagne on a broader "Scale of Global Assessment" for alpine climbing (the French Alpine System), and created the "UIAA Scale of Overall Difficulty" by assigning Roman numerals I–VI to the six adjectival levels (e.g. F, PD, AD, D, TD, and ED) of the French system. The UIAA also incorporated a "Scale of Difficulty in Aided Climbing" for aid routes with the levels: A1, A2, A3, A4, and (later) A5. In 1978, the UIAA added the VII (seventh grade) to its "UIAA scale", implying that the scale was open-ended, a concept formally adopted in 1985.

By the 1980s, French guides had customized the "UIAA scale" beyond V+ with the letters "a", "b", and c" (e.g. V+, VIa, VIb, etc.). At the end of the 1980s, French climbing guidebook author Francois Labande published the "French numerical scale", replacing the UIAA Roman numerals with Arabic numerals, where French 6a equaled UIAA VI+. The two scales were labelled "Plaisir Grades" and aligned in a UIAA table where French grades 1–6a aligned with "UIAA scale" grades I–VI+; beyond that level, the two systems diverged (e.g. French 7a+ equates to UIAA grade VIII and French 9a equates to UIAA grade XI).

In America, a version of the Welzenbach Scale was introduced for rock climbing in 1937 by the Sierra Club, which in the 1950s was further adapted into the Yosemite Decimal System that added a decimal place to the class 5 grade (e.g. 5.2, 5.3, 5.4, etc.), and which by the 1960s was again amended to introduce the letters "a", "b", "c", and "d" after 5.9 to further refine the levels (e.g. 5.9, 5.10a, 5.10b, 5.10c, etc.).

While individual countries developed their own rock climbing grading systems, the American system, French system, and latterly the "UIAA scale" became popular internationally (with the American and French dominating sport climbing). The UIAA "Scale of Overall Assessment" dropped its six Roman numbers in favor of the six adjectival grades of the French Alpine System (to avoid confusion with the "UIAA scale") and dominated alpine climbing grading, while the UIAA "Scale of Difficulty in Aided Climbing" – amended and expanded in Yosemite in the 1990s as "new-wave" grades – dominated aid grading.

Sign in to keep reading

6 more chapters are free with a Lably account.

More in Sports and recreation