Lably
Skip to content

India-based Neutrino Observatory

Indian physics research project

  • 10 min read
  • 3 chapters

Related on Lably

Through Neutrino, Research and Binding energy

The project was originally intended to be completed in 2015 at an estimated cost of ₹15,000,000,000 (₹15 billion or US$209.7 million), has been cleared by the Ministry of Environment for construction in the Bodi West Hills Reserved Forest in the Theni district of Tamil Nadu. After delay, the project was underway as of 2015.

When completed, the main magnetised iron calorimeter (ICAL) experiment is planned include the world's largest magnet, four times larger than the 12,500-tonne magnet in the Compact Muon Solenoid detector at CERN in Geneva, Switzerland.

Iron Calorimeter (ICAL) Detector

The main experiment proposed at INO is the Iron-Calorimeter Detector which aims to probe the Earth matter effects on the propagation of atmospheric neutrinos and to determine neutrino oscillation parameters in the 2-3 oscillation sector. ICAL is planned as a 50000 tonne magnetised detector with iron as the passive detector element and resistive plate chambers (RPCs) as the active detector elements. i.e., the neutrinos will interact with the iron to produce final state particles. The RPCs are expected to detect those final state particles which have charge and record the signals and those which have position and timing information to allow reconstruction of the tracks and/or showers and thus the energy and directions of the final state particles and also the incident neutrino.

The ICAL design is mostly based on the Monolith detector . It is planned that the ICAL detector will have three modules, each module with 151 layers of iron and 150 layers of RPCs, stacked one over the other. The dimension of the entire detector would be 48 m X 16 m X 14.5 m. The detector, owing to its huge size would require around 30000 glass RPCs for the purpose of charged particle detection. ICAL being a neutrino detector must be situated underground to reduce the cosmic ray muon signal.

The distance between INO and CERN is very close to "magic baseline" – a distance at which the effect of the CP phase on the measurement of θ13 is minimal. The major physics advantage of INO ICAL is its ability to measure neutrino mass hierarchy via studying atmospheric neutrinos.

The primary goals of the ICAL are the following:

  1. Unambiguous and precise determination of neutrino oscillation parameters using atmospheric neutrinos.
  2. Study of matter effects through electric charge identification, that may lead to the determination of the unknown sign of one of the mass differences.
  3. Study of charge-conjugation and charge parity (CP) violation in the leptonic sector as well as possible charge-conjugation, parity, time-reversal (CPT) violation studies.
  4. Study of Kolar events, possible identification of very-high energy neutrinos and multi-muon events.

Unlike Monolith experiment, ICAL detector will have iron plates of thickness 5.6 centimeters (2.2 in) as passive detectors, with glass RPCs in between as active detectors.

A prototype of the ICAL detector with 14 layers, measuring 1 m × 1 m × 1 m is already operational in the VECC, Kolkata. The 35 ton prototype is set up over ground to track cosmic muons.

In 2008, INO started a graduate training programme leading to PhD degree in high energy physics to provide expert training to students in the areas of detector building and neutrino physics.

A prototype called mini-ICAL, with 1/600 of the weight of ICAL, has been constructed to gain experience in the building of a large-scale electromagnet, to study the detector performance, and to test the ICAL electronics in the presence of fringe magnetic fields. This 4m × 4m × 1.1m detector has 11 iron layers, and 20 RPCs of 1.95m x 1.92m have been inserted in the 10 layers of gaps, in the central region. Mini-ICAL has been in operation since 2018, and is collecting cosmic ray muon data.

Sign in to keep reading

2 more chapters are free with a Lably account.

More in Physics