ISO/IEC 10367
- 2 min read
- 3 chapters
Related on Lably
Through Character encoding, ASCII and Hexadecimal
Relationship to ISO/IEC 8859
The parts of ISO/IEC 8859 define complete encodings at level 1 of ISO/IEC 4873 (i.e., as stateless extended ASCII single-byte encodings, reserving the C1 area), and do not allow for use of multiple parts together. For use at levels 2 and 3 of ISO/IEC 4873 (i.e., with shift codes for additional graphical character sets), ISO/IEC 8859 stipulates that equivalent sets from ISO/IEC 10367 should be used instead.
ISO/IEC 10367:1991 includes ASCII, as well as sets matching the G1 sets used for the right-hand sides (non-ASCII parts) of ISO/IEC 6937 (ITU T.51) and of ISO/IEC 8859 parts 1 through 9 (i.e., those parts that existed as of 1991, when it was published), a set of additional Roman characters supplementing some of those parts, and a set of box drawing characters (shown below).
Sign in to keep reading
2 more chapters are free with a Lably account.
Supplementary G3 Latin set
ISO/IEC 10367 includes the ISO-IR-154 graphical set, which is intended to supplement Latin alphabets number 1, 2 and 5 (i.e., ISO-8859-1, ISO-8859-2 and ISO-8859-9). Specifically, it is intended for use as a G3 set in a profile of ISO/IEC 4873 in which the G1 and G2 sets include the right hand side of ISO-8859-2, and also that of either ISO-8859-1 or ISO-8859-9. These configurations represent the entire ISO/IEC 6937 repertoire (ITU T.51 Annex A) without non-spacing codes.
For instance, the letter Ĉ would be encoded under ISO/IEC 4873 level 2 as 0x8F 0x23 if this set is included.
Highlighted characters also appear in ISO-8859-1 or ISO-8859-9. Under the current edition of ISO/IEC 4873 / ECMA-43 (though not earlier editions), characters must be used from the lowest-numbered working set they appear in, hence those characters are not used from this G3 set when the respective ISO-8859 right-hand side set is used as the G1 or G2 set.
Also in ISO-8859-1 Also in ISO-8859-9
Box drawing set
The following shows the box drawing set from ISO/IEC 10367, which is registered for ISO/IEC 2022 use as ISO-IR-155. It does not use the 0x20/A0 or 0x7F/FF positions, but is nonetheless registered as a 96-character set.
Perl libintl includes a "ISO_10367-BOX" codec. This encodes/decodes ASCII over GL and the ISO-IR-155 box drawing set over GR with a few deviations. Specifically, it includes double-lined box-drawing characters in place of heavy-lined characters, and it replaces the upper half block (▀) at 0xCB with a private use character U+E019, documented as "Unit space B".