Motorola MC14500B
- 1 min read
- 4 chapters
Related on Lably
Through Microprocessor and Relay
Overview
MC14500B (ICU) is well-suited to the implementation of ladder logic, and thus could be used to replace relay systems and programmable logic controllers, also intended for serial data manipulation. The processor supports 16 commands, operating at a frequency of 1 MHz. The MC14500B unit does not include a program counter (PC); instead, a clock signal drives a separate PC chip; therefore the size of supported memory is dependent on the implementation of that chip. It was still in production in 1995.
The ICU architecture is similar to that of the DEC PDP-14 computer.
Sign in to keep reading
3 more chapters are free with a Lably account.
Developers
The ICU was conceived by Vern Gregory in the mid-1970s while working as an engineer in a marketing / applications group of Motorola Semiconductor Products Sector in Phoenix, Arizona, USA; Brian Dellande originated circuit and sub-routine designs, and co-wrote the manual; Ray DiSilvestro was the bench technician; Terry Malarkey provided management support.
In the CMOS Logic Division in Austin, Texas, USA (where it was made) Phil Smith was the chip designer; Mike Hadley provided product applications support.
Derivatives
A form of the design served as an embedded controller in a custom automotive chip made for Nippon Denso by Motorola—Japan.
I.P.R.S. Băneasa manufactured a clone of the MC14500B with the designation βP14500 in IIL technology (rather than the original CMOS).
Notable uses
One of the computers known to be based on this processor is the educational WDR 1-bit computer (512 bits of RAM, LED, I/O, keyboard).
A modern take, in retro style, of a computer based on this processor is the PLC14500-Nano. It is certified as Open Source Hardware PL000011 so anyone can learn from its design and can freely build it.