Petrol engine
Internal combustion engine designed to run on gasoline
- 2 min read
- 4 chapters
Related on Lably
Through Gasoline
Most petrol engines use spark ignition, unlike diesel engines which run on diesel fuel and typically use compression ignition. Another key difference to diesel engines is that petrol engines typically have a lower compression ratio.
History
The first practical petrol engine was built in 1876 in Germany by Nicolaus August Otto and Eugen Langen, although there had been earlier attempts by Étienne Lenoir in 1860, Siegfried Marcus in 1864 and George Brayton in 1873.
Sign in to keep reading
3 more chapters are free with a Lably account.
Design
Thermodynamic cycle
Most petrol engines use either the four-stroke Otto cycle or the two-stroke cycle. Petrol engines have also been produced using the Miller cycle and Atkinson cycle.
Layout
Most petrol-powered piston engines are straight engines or V engines. However, flat engines, W engines and other layouts are sometimes used.
Wankel engines are classified by the number of rotors used.
Compression ratio
Cooling
Petrol engines are either air-cooled or water-cooled.
Ignition
Petrol engines use spark ignition. High voltage for the spark this may be provided by a magneto or an ignition coil. In modern car engines, the ignition timing is managed by an electronic Engine Control Unit. Ignition modules can also function as a rev limiter in some cases to prevent overrevving and the consequences of it, such as valve float and connecting rod failure.
Primer
Primers may be used to help start the engine. They can draw fuel from fuel tanks and vaporize fuel directly into piston cylinders. Engines are difficult to start during cold weather, and the fuel primer helps because otherwise there will not be enough heat available to vaporize the fuel in the carburetor.
Power output and efficiency
The power output of small- and medium-sized petrol engines (along with equivalent engines using other fuels) is usually measured in kilowatts or horsepower.
Typically, petrol engines have a thermodynamic efficiency of about 20-30% (approximately half that of some diesel engines).
Applications
Applications of petrol engines include automobiles, motorcycles, aircraft, motorboats and small engines (such as lawn mowers, chainsaws and portable generators). Petrol engines have also been used as "pony engines", a type of engine used to start a larger, stationary diesel engine.