Lably
Skip to content

Ranger program

  • 5 min read
  • 2 chapters

Explore on Lably

ToursExplore Lably’s 3D tours

Ranger was originally designed, beginning in 1959, in three distinct phases, called "blocks". Each block had different mission objectives and progressively more advanced system design. The JPL mission designers planned multiple launches in each block, to maximize the engineering experience and scientific value of the mission and to assure at least one successful flight. Total research, development, launch, and support costs for the Ranger series of spacecraft (Rangers 1 through 9) was approximately $170 million (equivalent to $1.25 billion in 2023).

Ranger spacecraft

Each of the block III Ranger spacecraft had six cameras on board. The cameras were fundamentally the same with differences in exposure times, fields of view, lenses, and scan rates. The camera system was divided into two channels, P (partial) and F (full). Each channel was self-contained with separate power supplies, timers, and transmitters. The F-channel had two cameras: the wide-angle A-camera and the narrow angle B-camera. The P-channel had four cameras: P1 and P2 (narrow angle) and P3 and P4 (wide angle). The final F-channel image was taken between 2.5 and 5 seconds before impact (altitude about 5 kilometres (3.1 mi)) and the last P-channel image 0.2 to 0.4 seconds before impact (altitude about 600 metres (2,000 ft)). The images provided better resolution than was available from Earth-based views by a factor of 1000. The design and construction of the cameras was led by Leonard R Malling. The Ranger program manager for the first six spacecraft was James D. Burke.

The camera preamplifiers of the Ranger program used Nuvistors.

Sign in to keep reading

One more chapter is free with a Lably account.

More in Optical, navigation and astronomical