Lably
Skip to content

Shell tools in the Philippines

  • 4 min read
  • 3 chapters

Related on Lably

Through Neolithic

Shell tools in the Philippines

Production and manufacturing

Shell adzes were made by percussion flaking and grinding. A piece of shell was extracted from the main shell by either direct percussion flaking or possibly by sticking against an anvil underneath as in bipolar percussion flaking. The final shaping and finishing work was done by either grinding the shell against a wet abrasive surface such as sandstone or by grinding against loose wet sand placed on a hard surface. There are two locations on a giant clam that produces the largest pieces of shell. One is at the hinge and the other is at the ribs. Sections cut from these locations provide the thickest pieces of shell and the largest adzes.

The shells of giant clams were fashioned into large spherical beads with holes drilled end to end at the center while pendants for the ear were ground from cone shells. Perforations were drilled at the center of the disk. Bracelets and anklets were both made from giant clams and cone shells. Shell bracelets made from the top shoulder of the body whorls of cone shells (Conus litteratus) are characteristic of the Late Neolithic Age. The natural spiral found along the shoulders of the shell serves as a decorative motif.

Sign in to keep reading

2 more chapters are free with a Lably account.

More in History