Sodium dithionite

Preparation

Sodium dithionite is produced industrially by reduction of sulfur dioxide. Approximately 300,000 tons were produced in 1990. The route using zinc powder is a two-step process:

2 SO₂ + Zn → ZnS₂O₄

ZnS₂O₄ + 2 NaOH → Na₂S₂O₄ + Zn(OH)₂

The sodium borohydride method obeys the following stoichiometry:

NaBH₄ + 8 NaOH + 8 SO₂ → 4 Na₂S₂O₄ + NaBO₂ + 6 H₂O

Each equivalent of H⁻ reduces two equivalents of sulfur dioxide. Formate has also been used as the reductant.

Properties and reactions

Hydrolysis

Sodium dithionite is stable when dry, but aqueous solutions deteriorate due to the following reaction:

2 S₂O₄²⁻ + H₂O → S₂O₃²⁻ + 2 HSO₃⁻

This behavior is consistent with the instability of dithionous acid. Thus, solutions of sodium dithionite cannot be stored for a long period of time.

Anhydrous sodium dithionite decomposes to sodium sulfate and sulfur dioxide above 90 °C in the air. In absence of air, it decomposes quickly above 150 °C to sodium sulfite, sodium thiosulfate, sulfur dioxide and trace amount of sulfur.

Redox reactions

Sodium dithionite is a reducing agent. At pH 7, the potential is -0.66 V compared to the normal hydrogen electrode. Redox occurs with formation of bisulfite:

S₂O₄^2- + 2 H₂O → 2 HSO₃⁻ + 2 e⁻ + 2 H⁺

Sodium dithionite reacts with oxygen:

Na₂S₂O₄ + O₂ + H₂O → NaHSO₄ + NaHSO₃

These reactions exhibit complex pH-dependent equilibria involving bisulfite, thiosulfate, and sulfur dioxide.

With organic carbonyls

In the presence of aldehydes, sodium dithionite reacts either to form α-hydroxy-sulfinates at room temperature or to reduce the aldehyde to the corresponding alcohol above a temperature of 85 °C. Some ketones are also reduced under similar conditions.

Uses

Industry

Sodium dithionite is used as a water-soluble reducing agent in some industrial dyeing processes. In the case of sulfur dyes and vat dyes, an otherwise water-insoluble dye can be reduced into its water-soluble alkali metal leuco salt. Indigo dye is sometimes processed in this way.

Domestic and hobby uses

Sodium dithionite can also be used for water treatment, aquarium water conditioners, gas purification, cleaning, and stripping. In addition to the textile industry, this compound is used in industries concerned with leather, foods, polymers, photography, and many others, often as a decolourising agent. It is even used domestically as a decolouring agent for white laundry, when it has been accidentally stained by way of a dyed item slipping into the high temperature washing cycle. It is usually available in 5 gram sachets termed hydrosulphite after the antiquated name of the salt.

It is the active ingredient in "Iron Out Rust Stain Remover", a commercial rust product.

Laboratory

Sodium dithionite is often used in physiology experiments as a means of lowering solutions' redox potential (E^o' -0.66 V vs SHE at pH 7). Potassium ferricyanide is usually used as an oxidizing chemical in such experiments (E^o' ~ .436 V at pH 7). In addition, sodium dithionite is often used in soil chemistry experiments to determine the amount of iron that is not incorporated in primary silicate minerals. Hence, iron extracted by sodium dithionite is also referred to as "free iron."

Aqueous solutions of sodium dithionite were once used to produce 'Fieser's solution' for the removal of oxygen from a gas stream. Pyrithione can be prepared in a two-step synthesis from 2-bromopyridine by oxidation to the N-oxide with a suitable peracid followed by substitution using sodium dithionite to introduce the thiol functional group.

Photography

It is used in Kodak fogging developer, FD-70. This is used in the second step in processing black and white positive images, for making slides. It is part of the Kodak Direct Positive Film Developing Outfit.

Safety

The wide use of sodium dithionite is attributable in part to its low toxicity LD₅₀ at 2.5 g/kg (rats, oral).