Specific strength
Ratio of strength to mass for a material
- 2 min read
- 4 chapters
Related on Lably
Through Density, Pascal (unit) and Metre
Another way to describe specific strength is breaking length, also known as self support length: the maximum length of a vertical column of the material (assuming a fixed cross-section) that could suspend its own weight when supported only at the top. For this measurement, the definition of weight is the force of gravity at the Earth's surface (standard gravity, 9.80665 m/s2) applying to the entire length of the material, not diminishing with height. This usage is more common with certain specialty fiber or textile applications.
The materials with the highest specific strengths are typically fibers such as carbon fiber, glass fiber, and various polymers, and these are frequently used to make composite materials (e.g. carbon fiber-epoxy). These materials, and others such as titanium, aluminium, magnesium, and high strength steel alloys, are widely used in aerospace and other applications where weight savings are worth the higher material cost.
Note that strength and stiffness are distinct. Both are important in design of efficient and safe structures.
Calculations of breaking length
where L is the length, Ts is the tensile strength, ρ is the density, and g is the acceleration due to gravity (≈ 9.8 m/s2)
Sign in to keep reading
3 more chapters are free with a Lably account.
Examples
The data of this table is from best cases, and has been established for giving a rough figure.
Note: Multiwalled carbon nanotubes have the highest tensile strength of any material yet measured, with labs producing them at a tensile strength of 63 GPa, still well below their theoretical limit of 300 GPa. The first nanotube ropes (20 mm long) whose tensile strength was published (in 2000) had a strength of 3.6 GPa, still well below their theoretical limit. The density is different depending on the manufacturing method, and the lowest value is 0.037 or 0.55 (solid).
Fundamental limit on specific strength
The null energy condition places a fundamental limit on the specific strength of any material. The specific strength is bounded to be no greater than c2 ≈ 9×1013 kN⋅m/kg, where c is the speed of light. This limit is achieved by electric and magnetic field lines, QCD flux tubes, and the fundamental strings hypothesized by string theory.
Tenacity (textile strength)
Tenacity is the customary measure of strength of a fiber or yarn. It is usually defined as the ultimate (breaking) force of the fiber (in gram-force units) divided by the denier. Because denier is a measure of the linear density, the tenacity works out to be not a measure of force per unit area, but rather a quasi-dimensionless measure analogous to specific strength. A tenacity of corresponds to: Mostly Tenacity expressed in report as cN/tex.