Lably
Skip to content

12-hour clock

Time counting system

  • 9 min read
  • 4 chapters

Learn it on Lably

The 12-hour time convention is common in several English-speaking nations and former British colonies, as well as a few other countries. In English-speaking countries: "12 p.m." usually indicates noon, while "12 a.m." means midnight, but the reverse convention has also been used (see § Confusion at noon and midnight). "Noon" and "midnight" are unambiguous.

History and use

The natural day-and-night division of a calendar day forms the fundamental basis as to why each day is split into two cycles. Originally there were two cycles: one cycle which could be tracked by the position of the Sun (day), followed by one cycle which could be tracked by the Moon and stars (night). This eventually evolved into the two 12-hour periods which are used today, one called "a.m." starting at midnight and another called "p.m." starting at noon.

The 12-hour clock can be traced back as far as Mesopotamia and ancient Egypt. Both an Egyptian sundial for daytime use and an Egyptian water clock for night-time use were found in the tomb of Pharaoh Amenhotep I. Dating to c. 1500 BC, these clocks divided their respective times of use into 12 hours each.

The ancient Romans also used a 12-hour clock: daylight and nighttime were each divided into 12 equal intervals (of varying duration according to the season). The nighttime hours were grouped into four watches (vigiliae).

The first mechanical clocks in the 14th century, if they had dials at all, showed all 24 hours using the 24-hour analog dial, influenced by astronomers' familiarity with the astrolabe and sundial and by their desire to model the Earth's apparent motion around the Sun. In Northern Europe these dials generally used the 12-hour numbering scheme in Roman numerals but showed both a.m. and p.m. periods in sequence. This is known as the double-XII system and can be seen on many surviving clock faces, such as those at Wells and Exeter.

Elsewhere in Europe, numbering was more likely to be based on the 24-hour system (I to XXIV). The 12-hour clock was used throughout the British Empire.

During the 15th and 16th centuries, the 12-hour analog dial and time system gradually became established as standard throughout Northern Europe for general public use. The 24-hour analog dial was reserved for more specialized applications, such as astronomical clocks and chronometers.

Most analog clocks and watches today use the 12-hour dial, on which the shorter hour hand rotates once every 12 hours and twice in one day. Some analog clock dials have an inner ring of numbers along with the standard 1-to-12 numbered ring. The number 12 is paired either with a 00 or a 24, while the numbers 1 through 11 are paired with the numbers 13 through 23, respectively. This modification allows the clock to also be read in 24-hour notation. This kind of 12-hour clock can be found in countries where the 24-hour clock is preferred.

Use by country

In several countries the 12-hour clock is the dominant written and spoken system of time, predominantly in nations that were part of the former British Empire, for example, the United Kingdom, Republic of Ireland, the United States, Canada (excluding Quebec), Australia, New Zealand, South Africa, India, Pakistan, and Bangladesh, and others follow this convention as well, such as Mexico, Colombia, and the former American colony of the Philippines. Even in those countries where the 12-hour clock is predominant, there are frequently contexts (such as science, medicine, the military or transport) in which the 24-hour clock is preferred. In most countries, however, the 24-hour clock is the standard system used, especially in writing. Some nations in Europe and Latin America use a combination of the two, preferring the 12-hour system in colloquial speech but using the 24-hour system in written form and in formal contexts.

The 12-hour clock in speech often uses phrases such as ... in the morning, ... in the afternoon, ... in the evening, and ... at night. Rider's British Merlin almanac for 1795 and a similar almanac for 1773 published in London used them. Other than in English-speaking countries and some Spanish-speaking countries, the terms a.m. and p.m. are seldom used and often unknown.

Computer support

In most countries, computers by default show the time in 24-hour notation. Most operating systems, including Microsoft Windows and Unix-like systems such as Linux and macOS, activate the 12-hour notation by default for a limited number of language and region settings. This behaviour can be changed by the user, such as with the Windows operating system's "Region and Language" settings.

Sign in to keep reading

3 more chapters are free with a Lably account.

More in Optical, navigation and astronomical