Computerized adaptive testing

Examples

CAT has existed since the 1970s, and there are now many assessments that utilize it.

• Graduate Management Admission Test
• MAP test from NWEA
• SAT (beginning outside of the US in 2023 and in the US in 2024)
• National Council Licensure Examination
• Armed Services Vocational Aptitude Battery

Additionally, a list of active CAT exams is found at International Association for Computerized Adaptive Testing, along with a list of current CAT research programs and a near-inclusive bibliography of all published CAT research.

Advantages

Adaptive tests can provide uniformly precise scores for most test-takers. In contrast, standard fixed tests almost always provide the best precision for test-takers of medium ability and increasingly poorer precision for test-takers with more extreme test scores.

An adaptive test can typically be shortened by 50% and still maintain a higher level of precision than a fixed version. This translates into time savings for the test-taker. Test-takers do not waste their time attempting items that are too hard or trivially easy. Additionally, the testing organization benefits from the time savings; the cost of examinee seat time is substantially reduced. However, because the development of a CAT involves much more expense than a standard fixed-form test, a large population is necessary for a CAT testing program to be financially fruitful.

Large target populations can generally be exhibited in scientific and research-based fields. CAT testing in these aspects may be used to catch early onset of disabilities or diseases. The growth of CAT testing in these fields has increased greatly in the past 10 years. Once not accepted in medical facilities and laboratories, CAT testing is now encouraged in the scope of diagnostics.

Like any computer-based test, adaptive tests may show results immediately after testing.

Adaptive testing, depending on the item selection algorithm, may reduce exposure of some items because examinees typically receive different sets of items rather than the whole population being administered a single set. However, it may increase the exposure of others (namely the medium or medium/easy items presented to most examinees at the beginning of the test).

Disadvantages

The first issue encountered in CAT is the calibration of the item pool. In order to model the characteristics of the items (e.g., to pick the optimal item), all the items of the test must be pre-administered to a sizable sample and then analyzed. To achieve this, new items must be mixed into the operational items of an exam (the responses are recorded but do not contribute to the test-takers' scores), called "pilot testing", "pre-testing", or "seeding". This presents logistical, ethical, and security issues. For example, it is impossible to field an operational adaptive test with brand-new, unseen items; all items must be pretested with a large enough sample to obtain stable item statistics. This sample may be required to be as large as 1,000 examinees. Each program must decide what percentage of the test can reasonably be composed of unscored pilot test items.

Although adaptive tests have exposure control algorithms to prevent overuse of a few items, the exposure conditioned upon ability is often not controlled and can easily become close to 1. That is, it is common for some items to become very common on tests for people of the same ability. This is a serious security concern because groups sharing items may well have a similar functional ability level. In fact, a completely randomized exam is the most secure (but also least efficient).

Review of past items is generally disallowed, as adaptive tests tend to administer easier items after a person answers incorrectly. Supposedly, an astute test-taker could use such clues to detect incorrect answers and correct them. Or, test-takers could be coached to deliberately pick a greater number of wrong answers leading to an increasingly easier test. After tricking the adaptive test into building a maximally easy exam, they could then review the items and answer them correctly—possibly achieving a very high score. Test-takers frequently complain about the inability to review.

Because of the sophistication, the development of a CAT has a number of prerequisites. The large sample sizes (typically hundreds of examinees) required by IRT calibrations must be present. Items must be scorable in real time if a new item is to be selected instantaneously. Psychometricians experienced with IRT calibrations and CAT simulation research are necessary to provide validity documentation. Finally, a software system capable of true IRT-based CAT must be available.

In a CAT with a time limit it is impossible for the examinee to accurately budget the time they can spend on each test item and to determine if they are on pace to complete a timed test section. Test takers may thus be penalized for spending too much time on a difficult question which is presented early in a section and then failing to complete enough questions to accurately gauge their proficiency in areas which are left untested when time expires. While untimed CATs are excellent tools for formative assessments which guide subsequent instruction, timed CATs are unsuitable for high-stakes summative assessments used to measure aptitude for jobs and educational programs.

Components

There are five technical components in building a CAT (the following is adapted from Weiss & Kingsbury, 1984). This list does not include practical issues, such as item pretesting or live field release.

1. Calibrated item pool
2. Starting point or entry level
3. Item selection algorithm
4. Scoring procedure
5. Termination criterion

Calibrated item pool

A pool of items must be available for the CAT to choose from. Such items can be created in the traditional way (i.e., manually) or through automatic item generation. The pool must be calibrated with a psychometric model, which is used as a basis for the remaining four components. Typically, item response theory is employed as the psychometric model. One reason item response theory is popular is because it places persons and items on the same metric (denoted by the Greek letter theta), which is helpful for issues in item selection (see below).

Starting point

In CAT, items are selected based on the examinee's performance up to a given point in the test. However, the CAT is obviously not able to make any specific estimate of examinee ability when no items have been administered. So some other initial estimate of examinee ability is necessary. If some previous information regarding the examinee is known, it can be used, but often the CAT just assumes that the examinee is of average ability – hence the first item often being of medium difficulty level.

Item selection algorithm

As mentioned previously, item response theory places examinees and items on the same metric. Therefore, if the CAT has an estimate of examinee ability, it is able to select an item that is most appropriate for that estimate. Technically, this is done by selecting the item with the greatest information at that point. Information is a function of the discrimination parameter of the item, as well as the conditional variance and pseudo-guessing parameter (if used).

Scoring procedure

After an item is administered, the CAT updates its estimate of the examinee's ability level. If the examinee answered the item correctly, the CAT will likely estimate their ability to be somewhat higher, and vice versa. This is done by using the item response function from item response theory to obtain a likelihood function of the examinee's ability. Two methods for this are called maximum likelihood estimation and Bayesian estimation. The latter assumes an a priori distribution of examinee ability, and has two commonly used estimators: expectation a posteriori and maximum a posteriori. Maximum likelihood is equivalent to a Bayes maximum a posteriori estimate if a uniform (f(x)=1) prior is assumed. Maximum likelihood is asymptotically unbiased, but cannot provide a theta estimate for an unmixed (all correct or incorrect) response vector, in which case a Bayesian method may have to be used temporarily.

Termination criterion

The CAT algorithm is designed to repeatedly administer items and update the estimate of examinee ability. This will continue until the item pool is exhausted unless a termination criterion is incorporated into the CAT. Often, the test is terminated when the examinee's standard error of measurement falls below a certain user-specified value, hence the statement above that an advantage is that examinee scores will be uniformly precise or "equiprecise." Other termination criteria exist for different purposes of the test, such as if the test is designed only to determine if the examinee should "Pass" or "Fail" the test, rather than obtaining a precise estimate of their ability.

Other issues

Pass-fail

In many situations, the purpose of the test is to classify examinees into two or more mutually exclusive and exhaustive categories. This includes the common "mastery test" where the two classifications are "pass" and "fail", but also includes situations where there are three or more classifications, such as "Insufficient", "Basic", and "Advanced" levels of knowledge or competency. The kind of "item-level adaptive" CAT described in this article is most appropriate for tests that are not "pass/fail" or for pass/fail tests where providing good feedback is extremely important. Some modifications are necessary for a pass/fail CAT, also known as a computerized classification test (CCT). For examinees with true scores very close to the passing score, computerized classification tests will result in long tests while those with true scores far above or below the passing score will have the shortest exams.

For example, a new termination criterion and scoring algorithm must be applied that classifies the examinee into a category rather than providing a point estimate of ability. There are two primary methodologies available for this. The more prominent of the two is the sequential probability ratio test (SPRT). This formulates the examinee classification problem as a hypothesis test that the examinee's ability is equal to either some specified point above the cutscore or another specified point below the cutscore. Note that this is a point hypothesis formulation rather than a composite hypothesis formulation that is more conceptually appropriate. A composite hypothesis formulation would be that the examinee's ability is in the region above the cutscore or the region below the cutscore.

A confidence interval approach is also used, where after each item is administered, the algorithm determines the probability that the examinee's true-score is above or below the passing score. For example, the algorithm may continue until the 95% confidence interval for the true score no longer contains the passing score. At that point, no further items are needed because the pass-fail decision is already 95% accurate, assuming that the psychometric models underlying the adaptive testing fit the examinee and test. This approach was originally called "adaptive mastery testing" but it can be applied to non-adaptive item selection and classification situations of two or more cutscores (the typical mastery test has a single cutscore).

As a practical matter, the algorithm is generally programmed to have a minimum and a maximum test length (or a minimum and maximum administration time). Otherwise, it would be possible for an examinee with ability very close to the cutscore to be administered every item in the bank without the algorithm making a decision.

The item selection algorithm utilized depends on the termination criterion. Maximizing information at the cutscore is more appropriate for the SPRT because it maximizes the difference in the probabilities used in the likelihood ratio. Maximizing information at the ability estimate is more appropriate for the confidence interval approach because it minimizes the conditional standard error of measurement, which decreases the width of the confidence interval needed to make a classification.

Practical constraints of adaptivity

ETS researcher Martha Stocking has quipped that most adaptive tests are actually barely adaptive tests (BATs) because, in practice, many constraints are imposed upon item choice. For example, CAT exams must usually meet content specifications; a verbal exam may need to be composed of equal numbers of analogies, fill-in-the-blank and synonym item types. CATs typically have some form of item exposure constraints, to prevent the most informative items from being over-exposed. Also, on some tests, an attempt is made to balance surface characteristics of the items such as gender of the people in the items or the ethnicities implied by their names. Thus CAT exams are frequently constrained in which items it may choose and for some exams the constraints may be substantial and require complex search strategies (e.g., linear programming) to find suitable items.

A simple method for controlling item exposure is the "randomesque" or strata method. Rather than selecting the most informative item at each point in the test, the algorithm randomly selects the next item from the next five or ten most informative items. This can be used throughout the test, or only at the beginning. Another method is the Sympson-Hetter method, in which a random number is drawn from U(0,1), and compared to a k_i parameter determined for each item by the test user. If the random number is greater than k_i, the next most informative item is considered.

Wim van der Linden and colleagues have advanced an alternative approach called shadow testing which involves creating entire shadow tests as part of selecting items. Selecting items from shadow tests helps adaptive tests meet selection criteria by focusing on globally optimal choices (as opposed to choices that are optimal for a given item).

Multidimensional

Given a set of items, a multidimensional computer adaptive test (MCAT) selects those items from the bank according to the estimated abilities of the student, resulting in an individualized test. MCATs seek to maximize the test's accuracy, based on multiple simultaneous examination abilities (unlike a computer adaptive test – CAT – which evaluates a single ability) using the sequence of items previously answered (Piton-Gonçalves & Aluísio 2012).