Lably
Skip to content

French battleship Brennus

  • 14 min read
  • 2 chapters

Related on Lably

Through World War I, Quadrilateral and Tonne

Brennus spent the majority of her service in the Mediterranean Squadron, and she served as its flagship early in her career. In 1900, she accidentally rammed and sank the destroyer Framée. As newer battleships were commissioned into the fleet, Brennus was relegated to the Reserve Squadron in the early 1900s and then served as a training ship. The ship had been decommissioned before the First World War began in August 1914 and was disarmed in 1915. She served as a source of spare parts and equipment for other ships during the war. Her hulk was stricken from the naval register in 1919 and was ultimately scrapped three years later.

Design

In 1880, the French Navy embarked on a naval construction program that included the ironclad battleships Hoche and the three-ship Marceau class; the program called for two more vessels, which were to be laid down in 1882. The first of these was to have been named Brennus and work began in 1885. Admiral Théophile Aube, who opposed battleship construction in favor of the cheaper torpedo boats and cruisers of the Jeune École, became the Naval Minister and cancelled both ships in January 1886 before much work had been done. Aube left the government in 1887 and his successor permitted work to resume; the ship's designer, Charles Ernest Huin, lobbied to restart construction to keep the shipyards busy. He re-designed Brennus to meet new requirements and the design was approved in 1889, allowing work to resume. The sections of hull that had been assembled on the slipway were dismantled, with the steel used elsewhere in the new ship. The fact that the same slipway was used to build both vessels, and parts of the original were reused in the latter vessel has caused some to conflate the vessels. The two ships were, nevertheless, distinct vessels. The second Brennus was ordered in 1888.

Brennus was the first pre-dreadnought-style battleship built in the French Navy; the previous Magenta-class ships were barbette ships, a type of ironclad battleship. The ship introduced several advances for the French fleet: new, 42-caliber guns arranged in turrets forward and aft of the superstructure, the first use of homogeneous steel armor, and the first Belleville boilers. Other changes included the adoption of a thin upper strake of armor to protect against quick-firing guns and the abandonment of the ram bow. Brennus formed the basis for the subsequent group of five broadly similar battleships built to the same design specifications, begun with Charles Martel, though they reverted to the armament layout of the earlier Magentas which saw the main guns distributed in single turrets in a lozenge (quadrilateral) pattern.

General characteristics and machinery

Brennus was 110.3 meters (361 ft 11 in) long between perpendiculars and 114.46 meters (375 ft 6 in) long overall. The ship had a beam of 20.4 m (66 ft 11 in), a draft of 8.28 m (27 ft 2 in). and displaced 11,370 metric tons (11,190 long tons) at deep load, after her reconstruction. Brennus proved to be grossly overweight; during her initial sea trials in 1893, her draft was 38 cm (15 in) greater than it should have been, and this was not in a fully loaded condition. The increased draft submerged most of the ship's armored belt, rendering it largely useless. Her hull was subdivided by 18 watertight bulkheads and she had a double bottom that extended over the full length of the hull except at the bow. Brennus had a crew of 667 officers and enlisted men.

The ship suffered from very poor stability, largely a result of her massive superstructure that placed a great deal of weight high in the ship. These problems were not fully solved by extensive reconstruction between 1893 and 1896, which contributed to a short career. Her first stability trial was conducted on 17 June 1893 with all her guns traversed to starboard and her entire crew mustered on the same side; Brennus took on a 28° list and the barrels of her 164.7 mm casemate guns were half-submerged. Her metacentric height was calculated at 0.75 m (2.5 ft) during this incident. The ship's excessive topweight from her massive superstructure, heavy military masts and tall funnels contributed to the problem, together with the pronounced tumblehome of her hull.

Brennus had a pair of four-cylinder vertical triple-expansion steam engines, each driving a single 5.4-meter (17 ft 9 in), four-bladed propeller, using steam supplied by 32 Belleville water-tube boilers at a working pressure of 17 kg/cm2 (1,667 kPa; 242 psi). The boilers exhausted into a pair of large funnels located amidships. The decision to fit Brennus with water-tube boilers was made in 1887, and she was the first large ship to be equipped with them. Her engines were rated at 12,500 metric horsepower (9,200 kW), which was intended to allow the ship to steam at a speed of 17 knots (31 km/h; 20 mph); during her sea trials on 9 January 1896, Brennus reached a maximum speed of 17.1 knots (31.7 km/h; 19.7 mph) from 14,133 PS (10,395 kW). The ship could carry 706 t (695 long tons) of coal, which gave her a range of 2,805 nautical miles (5,195 km; 3,228 mi) at a speed of 11 knots (20 km/h; 13 mph). Electricity for lighting, searchlights, pumps, ventilators and other equipment was provided by four 400-ampere dynamos, each driven by a dedicated internal-combustion engine.

Armament and armor

Brennus's main battery consisted of three 42-caliber Canon de 340 mm (13.4 in) Modèle 1887 guns, two in a twin turret forward of the superstructure, and the third in a single turret aft. They fired 420-kilogram (930 lb) cast iron (CI) projectiles, or heavier 490-kilogram (1,080 lb) armor-piercing, capped (APC) and semi-armor-piercing, capped (SAPC) shells at a muzzle velocity of 740 to 780 meters per second (2,400 to 2,600 ft/s). At their maximum elevation of +10°, the guns had a range of 10,900 meters (11,900 yd). Designed to have a rate of fire of one round per two minutes, the actual rate of fire was about half that in service. The ship initially stowed 39 shells for each gun, but this was later increased to 61. The ship's secondary armament consisted of ten 45-caliber Canon de 164.7 mm (6.5 in) Modèle 1893 guns, four of which were mounted in single turrets amidships; the other six were located directly underneath them in casemates. They had a muzzle velocity of 730 to 770 m/s (2,400 to 2,500 ft/s) when firing their 30-kilogram (66 lb) CI or 35-kilogram (77 lb) AP or SAP shells. The guns had a range of 10,450 meters (11,430 yd) at their maximum elevation of +20°.

For defense against torpedo boats, Brennus was equipped with a suite of quick-firing guns, the largest of which were four 50-caliber Canon de 65 mm (2.6 in) Modèle 1891 guns in single unshielded mounts on the fore and aft superstructure. Their 4-kilogram (8.8 lb) shells had a muzzle velocity of 715 m/s (2,350 ft/s) which gave them a range of 5,500 meters (6,000 yd). The suite was rounded out by fourteen 40-caliber 47 mm (1.9 in) Modèle 1885 guns and fourteen 37 mm (1.5 in) Modèle 1885 Hotchkiss guns, of which six of the latter were 5-barrel revolver cannon. All of these guns were positioned in the fighting tops on the military masts and in the superstructure. The ship was also fitted with four above-water 450-millimeter (17.7 in) torpedo tubes on rotating mounts, two on each broadside. She carried two Modèle 1889 torpedoes for each tube. The torpedoes had two speed and range settings: 600 m (660 yd) at 29.5 kn (54.6 km/h; 33.9 mph) or 800 m (870 yd) at 28 kn (51.9 km/h; 32.2 mph).

Brennus's armor mostly consisted of nickel steel. The 2.1-meter-high (6 ft 11 in) waterline belt was 400 mm (15.7 in) thick amidships and tapered down to 250 mm (9.8 in) at its lower edge. Fore and aft of the armored citadel amidships, the belt reduced to 300 mm (11.8 in) at the waterline; forward its lower edge tapered to a thickness of 200 mm (7.9 in), but aft the belt tapered to 180 mm (7.1 in) on its bottom edge. The main armored deck was 60 mm (2.4 in) thick. The forward turret and its barbette were protected by armor plates 455 mm (17.9 in) thick, while those of the aft turret and its barbette were 405 mm (15.9 in) thick. The turret roofs were 80 mm (3.1 in) thick. The armor protecting the casemates and secondary gun turrets had a thickness of 100 mm (3.9 in). The conning tower had 120 mm (4.7 in) thick sides.

Sign in to keep reading

One more chapter is free with a Lably account.

More in Ancient history