Guyed mast
Tall thin vertical structure that is supported by guy lines
- 3 min read
- 2 chapters
Related on Lably
Through Microwave, Ground (electricity) and Parallelogram
Applications
The principal applications of guyed masts are the masts of sailing vessels, guyed towers, and as the main tower of heavy equipment such as cranes, power shovels, draglines, and derricks, the simplest of which is the gin pole.
Guyed masts are frequently used for radio masts and towers. The mast can either support radio antennas (for VHF, UHF and other microwave bands) mounted at its top, or the entire structure itself can function as a mast radiator antenna (for VLF, LF, MF). In the latter case, the mast needs to be insulated from the ground. Guyed radio masts are typically tall enough that they require between two and four sets of guy lines attached at different heights on the mast, to prevent them from buckling. An exception to multiple guys was the Blaw-Knox tower, widely used during the 1930s, whose distinctive wide diamond (rhomboidal) shape gave it the shear strength that it only required one set of guys.
Guyed masts are sometimes also used for measurement towers, to collect meteorological measurements at certain heights above ground level. Sometimes they are used as pylons (transmission towers), although their usage in agricultural areas is problematic because anchor foundations handicap ploughing. The tallest guyed tower is currently the 2,060 feet (630 m) KRDK-TV mast in Traill County, North Dakota, United States.
The mast on heavy equipment such as a crane is its main supporting tower, typically of trussed steel construction. Wire rope guys typically lead back to the crane's base stabilize it and support its ability to bear significant shear loads while lifting.
Sign in to keep reading
One more chapter is free with a Lably account.
Partially guyed tower
A partially guyed tower is a tower structure which consists of a free-standing base, in most cases of concrete or of lattice steel, with a guyed mast on the top. The anchor base of the guyed mast can be on the top of the tower or on the ground.
Use
Partially guyed towers are typically used when a very high tower for FM and TV transmission is required, while also carrying antennas for directional radio services at a much lower height. In such cases the antennas for directional radio services are mounted on the top of the free-standing part of the tower, while the guyed mast on its top carry the FM and TV antennas. They can be also used in order to upgrade small stable towers (like watertowers) with a long antenna mast for FM and TV broadcasting. However their use is rare, and they exist chiefly in certain European countries.
Note that mast radiators which stand atop an antenna tuning hut (a.k.a. helix building) are not considered partially guyed towers, because the hut is much smaller than the mast radiator. Such constructions include the Mühlacker radio transmitter and the Ismaning radio transmitter.
Anchor placements
Partially guyed towers can be divided into two types, depending on the placement of the guy anchors.
Atop the free-standing tower
Guyed masts on skyscrapers or wider towers are often guyed on the roof of the free-standing basement structure. In such cases, there is no major constructive difference of the guyed mast to a guyed mast on plain ground, and the construction of the free-standing basement tower does not differ much from a tower of the same height without a mast. The guyed mast of such constructions is usually of lesser height than basement tower.
On the ground
Partially guyed towers in which at least one basement of the guy anchors is on the ground are more rare. The placement of guy basements across a broader geometric base allows for a mast much taller than the free-standing basement tower, and the integration of tower and mast should be considered in all facets of construction and maintenance.