Coal slurry
Product of coal preparation
- 2 min read
- 3 chapters
Related on Lably
Through Coal, Surfactant and Industrial wastewater treatment
Preparation
To transform the coal ash into a slurry, coal is separated from non-combustible components and can be fractionated by particle size as well. Coal slurry can be transferred by pipeline or with specialized pumps such as a progressive cavity pump to pump the highly abrasive, corrosive and viscous coal slurry. More than 7 billion tons of coal are mined per year (2010), using approximately 200 litres of water per ton. However, the amount of water required hinges on the surface characteristics of the coal being used. Most coal slurries require the addition of a surfactant to reduce the viscosity, ergo reduce the stress on pipelines and pumps.
Recent studies have employed new methods of slurry preparation, like using ultrasonic irradiation and a mixture of natural and synthetic surfactants to improve the stability and rheological properties of coal slurry.
Sign in to keep reading
2 more chapters are free with a Lably account.
Environmental concerns
Ideally, coal slurry consists only of crushed coal and water, which can be efficiently separated. In practice, the separation is significantly costly because of the large amounts of water needed and wastewater generated by the process. Furthermore, the slurry consists also of very fine coal dust that results in a waste called blackwater. As blackwater cannot be purified by a water treatment plant, it is stored in large impoundment ponds. Such ponds are susceptible to disastrous releases, such as the Buffalo Creek flood of 1972 or the Martin County coal slurry spill of 2000, which released over 250 million gallons of coal slurry. Coal slurry can contain hazardous chemicals such as arsenic and mercury and can kill aquatic wildlife, as was the case in the Martin County spill. This impounded liquid waste can sometimes total billions of gallons in a single facility.
The scope of coal slurry applications
To date, coal slurry fuels are recognised to have low energy density and therefore can only be successfully combusted in high compression engines such as diesel or gas turbine power plants (large engines with low energy density requirements). Other engine systems include slow speed diesel engines and turbines used as power plants for shipping and stationary electricity production. However, in the combustion market, for small and medium power plants ranging from 20 kW (27 hp) to 5 MW (6,700 hp), the utilisation of CSs will require boiler’s retrofitting.
Other applications found for these slurries are in systems such as boilers, gasifiers and stationary engines with specific requirements divided into two main areas: chemical and physical as shown in table below.