Lably
Skip to content

Pleura

Membrane lining the lungs and the thoracic cavity wall

  • 8 min read
  • 4 chapters

Related on Lably

Through Lung, Coelom and Secretion

The part of each pleura that covers the surface of the lung is the visceral pleura. The pleura typically dips between the lobes of the lung as fissures, and is formed by the invagination of lung buds into each thoracic sac during embryonic development. The part of the pleura that lines the chest wall, covers the diaphragm and other structures in the mediastinum such as major blood vessels, trachea, esophagus and the fibrous pericardium is the parietal pleura.

The parietal pleura can be subdivided in regions. The cervical pleura goes into the root of the neck; the costal pleura lies next to the ribs; the mediastinal pleura covers the mediastinum, and the diaphragmatic pleura covers the upper surface of the diaphragm.

At the root of the lung the visceral and parietal pleurae meet and form the hilum. A bell sleeve-like extension of the pulmonary pleura hanging under the hilum is known as the pulmonary ligament.

Between the two layers of the pleura is a space of about 15 μm, called the pleural cavity (also pleural space). It contains about 10 ml of serous fluid (pleural fluid) secreted by the pleurae, at an average pressure that is below the atmospheric pressure under healthy conditions. The two lungs, each bounded by a two-layered pleural sac, almost fill the thoracic cavity.

Anatomy

Each pleura comprises a superficial serosa made of a simple monolayer of flat (squamous) or cuboidal mesothelial cells with microvilli up to 6 μm (0.00024 in) long. The mesothelium is without basement membrane, and supported by a well-vascularized underlying loose connective tissue containing two poorly defined layers of elastin-rich laminae. The costal parietal pleurae also have adipocytes in the subserosa, which present as subpleural/extrapleural fats and are histologically considered belonging to the endothoracic fascia that separates the subserosa from the inner periosteum of the ribs. Both pleurae are quite firmly attached to their underlying structures, and are usually covered by surface glycocalyces that limit fluid loss and reduce friction.

The enclosed space between the parietal and visceral pleurae, known as the pleural space, is normally filled only by a tiny amount (less than 10 mL or 0.34 US fl oz) of serous fluid secreted from the apical region of the parietal pleura. The combination of surface tension, oncotic pressure, and the fluid pressure drop caused by the inward elastic recoil of the lung parenchyma and the rigidity of the chest wall, results in a normally negative pressure of -5 cmH2O (approximately −3.68 mmHg or −0.491 kPa) within the pleural space, causing it to mostly stay collapsed as a potential space that acts as a functionally vacuumous interface between the parietal and visceral pleurae. Contracting the respiratory muscles expands the chest cavity, causing the attached parietal pleura to also expand outwards. If the pleural functional vacuum stays intact, the pleural space will remain as collapsed as possible and cause the visceral pleura to be pulled along outwards, which in turn draws the underlying lung also into expansion. This transmits the pressure negativity into the alveoli and bronchioli, thus facilitating inhalation.

Visceral pleura

The visceral pleura (from Latin: viscera, lit. 'organ') covers the lung surfaces and extends caudally from the hilum as a mesentery-like band called the pulmonary ligament. Each lung is divided into lobes by the infoldings of the pleura as fissures. The fissures are double folds of pleura that section the lungs and help in their expansion, allowing the lung to ventilate more effectively even if parts of it (usually the basal segments) fail to expand properly due to congestion or consolidation. The function of the visceral pleura is to produce and reabsorb fluid. It is an area that is insensitive to pain due to its association with the lung and innervation by visceral sensory neurons.

The visceral pleura also forms interlobular septa (that separates secondary pulmonary lobules). Interlobular septa contain connective tissue, pulmonary veins, and lymphatics.

Parietal pleura

The parietal pleura (from Latin: paries, lit. 'wall') lines the inside of the thoracic cavity. This includes the inner surface of the rib cage and the upper surface of the diaphragm, as well as the side surfaces of the mediastinum. It joins the visceral pleura at the pericardial base of the pulmonary hilum and pulmonary ligament as a smooth but acutely angled circumferential junction known as the hilar reflection. The thoracic cavity is set apart from the thoracic wall by the endothoracic fascia.

The parietal pleura is subdivided according to the surface it covers.

Neurovascular supply

As a rule of thumb, the blood and nerve supply of a pleura comes from the structures under it. The visceral pleura is supplied by the capillaries that supply the lung surface (from both the pulmonary circulation and the bronchial vessels), and innervated by the nerve endings from the pulmonary plexus.

The parietal pleura is supplied by blood from the cavity wall under it, which can come from the aorta (intercostal, superior phrenic and inferior phrenic arteries), the internal thoracic arteries (pericardiacophrenic, anterior intercostal and musculophrenic branches), or their anastomoses. Similarly, its nerve supply is from its underlying structures — the costal pleura is innervated by the intercostal nerves; the diaphragmatic pleura is innervated by the phrenic nerve in its central portion around the central tendon, and by the intercostal nerves in its periphery near the costal margin; the mediastinal pleura is innervated by branches of the phrenic nerve over the fibrous pericardium.

Sign in to keep reading

3 more chapters are free with a Lably account.

More in Health