Lably
Skip to content

Fracking in the United States

  • 76 min read
  • 8 chapters

Related on Lably

Through Natural gas

New York banned massive hydraulic fracturing by executive order in 2010, so all natural gas production in the state is from wells drilled prior to the ban. Vermont, which has no known frackable gas reserves, banned fracking preventatively in May 2012. In March 2017, Maryland became the second state in the US with proven gas reserves to pass a law banning fracking. On May 8, 2019, Washington became the fourth state to ban fracking when Governor Jay Inslee signed SB 5145 into law after it passed the state senate by a vote of 29–18 and the House 61–37. Washington is a non-oil and gas state that had no fracking operations when the bill was passed.

An imbalance in the supply-demand dynamics for the oil and gas produced by hydraulic fracturing in the Permian Basin of west Texas is an increasing challenge for the local industry, as well as a growing impact to the environment. In 2018, so much excess natural gas was produced with oil that prices turned negative and wasteful flaring increased to a record 400 million cubic feet per day. By Q3 of 2019, the wasted gas from this region alone almost doubled to 750 million cubic feet per day, an amount more than capable of supplying the total residential needs of the state.

History

Non-hydraulic fracturing

Fracturing as a method to stimulate shallow, hard rock oil wells dates back to the 1860s. Oil producers in Pennsylvania, New York, Kentucky, and West Virginia used nitroglycerin (liquid at first, and later solid) to break up oil-bearing formations. The method was later applied to water and natural gas wells. The idea of using acid as a nonexplosive fluid for well stimulation was introduced in the 1930s. Acid etching kept fractures open and enhanced productivity. Water injection and squeeze cementing (injection of cement slurry) had similar effects.

Quarrying

The first industrial use of hydraulic fracturing was as early as 1903, according to T.L. Watson of the U.S. Geological Survey. Before that date, hydraulic fracturing was used at Mt. Airy Quarry, near Mt Airy, North Carolina where it was (and still is) used to separate granite blocks from bedrock.

Oil and gas wells

The relationship between well performance and treatment pressures was studied by Floyd Farris of Stanolind Oil and Gas Corporation. This study became a basis of the first hydraulic fracturing experiment, which was conducted in 1947 at the Hugoton gas field in Grant County of southwestern Kansas by Stanolind. For the well treatment, 1,000 US gallons (3,800 L; 830 imp gal) of gelled gasoline and sand from the Arkansas River was injected into the gas-producing limestone formation at 2,400 feet (730 m). The experiment was not very successful, as deliverability of the well did not change appreciably. The process was further described by J.B. Clark of Stanolind in his paper published in 1948. A patent on this process was issued in 1949, and an exclusive license was granted to the Halliburton Oil Well Cementing Company. On March 17, 1949, Halliburton performed the first two commercial hydraulic fracturing treatments in Stephens County, Oklahoma, and Archer County, Texas. The practice caught on quickly, and in June 1950, Newsweek reported that 300 oil wells had been treated with the new technique. In 1965, a US Bureau of Mines publication wrote of hydraulic fracturing: "Many fields are in existence today because of these fracturing techniques for, without them, many producing horizons would have been bypassed in the past 15 years as either barren or commercially nonproductive."

Massive hydraulic fracturing

In the 1960s, American geologists became increasingly aware of huge volumes of gas-saturated rocks with permeability too low (generally less than 0.1 millidarcy) to recover the gas economically. The US government experimented with using underground nuclear explosions to fracture the rock and enable gas recovery from the rock. Such explosions were tried in the San Juan Basin of New Mexico (Project Gasbuggy, 1967), and the Piceance Basin of western Colorado (Project Rulison, 1969, and Project Rio Blanco, 1973) but the results were disappointing, and the tests were halted. The petroleum industry turned to the new massive hydraulic fracturing technique as the way to recover tight gas.

The definition of a massive hydraulic fracturing varies somewhat, but the term is generally used for treatments injecting greater than about 300,000 pounds of proppant (136 tonnes). Pan American Petroleum applied the first massive hydraulic fracturing (also known as high-volume hydraulic fracturing) treatment in the world to a well in Stephens County, Oklahoma, in 1968. The treatment injected half a million pounds of proppant into the rock formation.

In 1973, Amoco introduced massive hydraulic fracturing to the Wattenberg Gas Field of the Denver Basin of Colorado, to recover gas from the low-permeability J Sandstone. Before massive hydraulic fracturing, the Wattenberg field was uneconomic. Injected volumes of 132,000 or more gallons, and 200,000 or more pounds of sand proppant, succeeded in recovering much greater volumes of gas than had been previously possible. In 1974, Amoco performed the first million-pound frac job, injecting more than a million pounds of proppant into the J Sand of a well in Wattenberg Field.

The success of massive hydraulic fracturing in the Wattenberg Field of Colorado was followed in the late 1970s by its use in gas wells drilled to tight sandstones of the Mesaverde Group of the Piceance Basin of western Colorado.

Starting in the 1970s, thousands of tight-sandstone gas wells in the US were stimulated by massive hydraulic fracturing. Examples of areas made economic by the technology include the Clinton-Medina Sandstone play in Ohio, Pennsylvania, and New York; the San Juan Basin in New Mexico and Colorado; numerous fields in the Green River Basin of Wyoming; and the Cotton Valley Sandstone trend of Louisiana and Texas.

Coalbed methane wells

Coalbed methane wells, which first began to be drilled in the 1980s, are commonly hydraulically fractured to increase the flow rates to the well. Hydraulic fracturing is commonly used in some coalbed methane areas, such as the Black Warrior Basin and the Raton Basin, but not in others, such as the Powder River Basin, depending on the local geology. Injected volumes tend to be much smaller than those of either tight gas wells or shale gas wells; a 2004 EPA study found a median injected volume of 57,500 US gallons (218,000 L; 47,900 imp gal) for coalbed methane wells.

Horizontal wells

The combination of horizontal drilling and multistage hydraulic fracturing was pioneered in Texas' Austin Chalk play in the 1980s. Stephen Holdich, head of the Department of Petroleum Engineering at Texas A&M University, commented: "In fact, the Austin Chalk is the model for modern shale development methods." The Austin Chalk play started in 1981 with vertical wells, but died with the decline in the oil price in 1982. In 1983, Maurer Engineering designed the equipment to drill the first medium-range horizontal well in the Austin Chalk. Horizontal drilling revived the play by increasing production, and lengths of the horizontal parts of the wellbores grew with greater experience and improvements in drilling technology. Union Pacific Resources, later acquired by Anadarko Petroleum, entered the Austin Chalk play in a major way in 1987, and drilled more than a thousand horizontal wells in the Austin Chalk, with multistage massive slickwater hydraulic fracture treatments, making major improvements in drilling and fracturing techniques.

Shales

Hydraulic fracturing of shales goes back at least to 1965, when some operators in the Big Sandy gas field of eastern Kentucky and southern West Virginia started hydraulically fracturing the Ohio Shale and Cleveland Shale, using relatively small fracs. The frac jobs generally increased production, especially from lower-yielding wells.

From 1976 to 1992 the United States government funded the Eastern Gas Shales Project, a set of dozens of public-private hydro-fracturing pilot demonstration projects. The program made a number of advances in hydraulic fracturing of shales. During the same period, the Gas Research Institute, a gas industry research consortium, received approval for research and funding from the Federal Energy Regulatory Commission.

In 1997, Nick Steinsberger, an engineer of Mitchell Energy (now part of Devon Energy), applied the slickwater fracturing technique, using more water and higher pump pressure than previous fracturing techniques, which was used in East Texas by Union Pacific Resources, in the Barnett Shale of north Texas. In 1998, the new technique proved to be successful when the first 90 days gas production from the well (called S.H. Griffin No. 3) exceeded production of any of the company's previous wells. This new completion technique made gas extraction widely economical in the Barnett Shale, and was later applied to other shales. George P. Mitchell has been called the "father of fracking" because of his role in applying it in shales. The first horizontal well in the Barnett Shale was drilled in 1991, but was not widely done in the Barnett until it was demonstrated that gas could be economically extracted from vertical wells in the Barnett.

Between 2005 and 2010, the shale-gas industry in the United States grew by 45% a year. As a proportion of the country's overall gas production, shale gas increased from 4% in 2005 to 24% in 2012.

According to oilfield services company Halliburton, as of 2013, more than 1.1 million hydraulic fracturing jobs have been done in the United States (some wells are hydraulically fractured more than once), and almost 90% of new US onshore oil and gas wells are hydraulically fractured.

Sign in to keep reading

7 more chapters are free with a Lably account.

More in Environment