Lably
Skip to content

Online and offline

Connected or disconnected state for equipment and services

  • 8 min read
  • 3 chapters
  • 3 labs on Lably

Learn it on Lably

"Online" has come to describe activities and concepts that take place on the Internet, such as online identity, online predator and online shop. A similar meaning is also given by the prefixes cyber and e, as in words cyberspace, cybercrime, email, and e-commerce. In contrast, "offline" can refer to either computing activities performed while disconnected from the Internet, or alternatives to Internet activities (such as shopping in brick-and-mortar stores). The term "offline" is sometimes used interchangeably with the acronym "IRL", meaning "in real life", as well as about office meetings in person wherein a formal, high-concentration meeting may have matters taken "offline" to a more relaxed moment away from the "online" high-stress meeting.

History

During the 19th century, the term on line was commonly used in both the railroad and telegraph industries. For railroads, a signal box would send messages down the line (track), via a telegraph line (cable), indicating the track's status: Train on line or Line clear. Telegraph linemen would refer to sending current through a line as direct on line or battery on line; or they may refer to a problem with the circuit as being on line, as opposed to the power source or end-point equipment.

Since at least 1950, in computing, the terms on-line and off-line have been used to refer to whether machines, including computers and peripheral devices, are connected or not. Here is an excerpt from the 1950 book High-Speed Computing Devices:

The use of automatic computing equipment for large-scale reduction of data will be strikingly successful only if means are provided for the automatic transcription of these data to a form suitable for automatic entry into the machine. For some applications, of which the most prominent are those in which the reduced data are used to control the process being measured, the input must be developed for on-line operation. In on-line operation the input is communicated directly and without delay to the data-reduction device. For other applications, off-line operation, involving automatic transcription of data in a form suitable for later introduction to the machine, may be tolerated. These requirements may be compared with teleprinter operating requirements. For example, some teletype machines operate on line. Their operators are in instantaneous communication. Other teletype machines are operated off line, through the intervention of punched paper tape. The message is preserved by means of holes punched in the tape and is transmitted later by feeding the tape to another machine.

Sign in to keep reading

2 more chapters are free with a Lably account.

More in Computing and communication